Eliminates Standby Electricity Usage

• Saves energy and helps protect the environment by reducing standby energy use which reduces greenhouse gas emissions created by generating power.
• With the energy saved by eliminating standby electricity, this unit could pay for itself in less than a year.
• 4 remote outlets.
• 2 “Always-on” transformer spaced outlets.
• 6ft power cord.
• 1 Remote control Transmitter (RF) activates remote outlets up to a distance of 80ft.
• Compatible with computers, monitors, printers, tvs, satellite / home theater receivers, and other electronics devices.
• UL Certified

Eliminates Standby Electricity Usage

This RF remote control surge protector lets you easily power off devices when not in use, saving both energy and money. A keycain remote allows you to manually cut the power to your individual devices on 4 “remote controlled” outlets. There are also two transformer spaced “Always - On” outlets for home theater devices such as DVRs or cable boxes. For the home office - fax machines, routers or modems.

The remote control surge protector allows easy access to inconvenient places where surge protectors typically sit. With this RF remote control you can completely shut off the power to devices that consumes standby power, such as TVs, DVD players, satellite and home theater receivers, computer monitors, printer and scanners.

This surge protector comes with 2100 joules to protect valuable electronic devices from damaging power spikes, lightning and interference found in all electrical power sources. When this occurs, the surge protector dissipates the incoming and outgoing voltage to a level that will not damage equipment or will completely shut down not allowing any electric current to reach any connected devices.

Surge LED indicator Lighted LED indicates surge is working.

ON / RESET / OFF Switch with built-in 15Amp Circuit Breaker Lighted LED Switch provides overload protection

Grounded LED Indicator Lighted LED indicates surge protector is connected to a properly grounded outlets

Receiver Indicator Lighted LED indicates remote control has turned “on” all remote outlets

Transformer spaced outlets “Always-On”

SPECIFICATIONS:

Electrical Rating: 15A, 125V, 1875W

Joules Rating: 2100J

Clamping Voltage: 400V

Max.Spike Current: 39000A

Max.Spike Voltage : 6000V

Response Time: faster than 1 nanosecond

EMI / RFI Noise Rejection: up to 20dB from 150KHz to 30MHz

PS102 Remote Control Surge Protector Standby Power Consumption: 1.65w

RECEIVER:

Max. Load : 10 Amps, 1250 Watts resistive load 5A, 625W Tungsten load

TRANSMITTER:

Range: Up to 80 feet / 24.2m

Battery: 12 Volts (included)

FCC ID: For use indoor, wattage of lamps or appliances being comtrolled should not exceed the capacity of unit.

FCC: OZIRC-05

CAUTION:

Avoid using this unit in wet, oily or high temperature conditions. Fully insert plugs into outlets. To avoid overheating, make sure the cord is uncoiled and knot free when in use. Use the grip on the plug to pull the plug out of the receptacle. Never pull the plug out but the wire. Do not use this unit as a switch for refrigerator or air conditioner unit. Do not use near water. Not intended for use with aquarium equipment. Store indoors when not in use. Do not use if cord or switch is damaged. Do not splice, repair or modify unit.

Limited Lifetime Product WARRANTY

Uninex International warrants to the original purchaser from the date of purchase that the surge protector shall be free of defects in design, assembly, material, or workmanship, and will repair or replace, at its option, any defective product free of charge.